How: charge alkaline batteries

Alkaline batteries was originally developed in the Canada battery technologies, Inc. and sale of several U.S. manufacturers.

Also known as RAM (manganese alkaline rechargeable) batteries have a life of permanent, as opposed to lithium or nickel-cadmium batteries. However, while you can load the alkaline batteries for this type of 100 or more time again, will reduce the number of mines you accept completely discharged battery. Alkaline batteries are therefore better in low power like remote controls devices used common charging is comfortable. Level of difficulty: Moderately easy

Instructions

Have things: batteries, alkaline battery charger

1. 1

   Make sure that you developed a battery charger to recharge the batteries.

Are Rayovac, and other manufacturers market magazines $10 to $50. Use None for nickel cadmium (NiCd) battery charger-batteries. This way of the loader cannot determine if alkaline batteries the battery fully charged batteries are you damage.

2

Download the alkaline batteries, if used some 25% of their support to maximize your life.

Every time that you have a rechargeable alkaline batteries in less than 75% of the load drains the battery drain. The deepest discharge is reduced more battery life.

3

Put the batteries in the charger and set the appropriate load (make sure the charger is connected).

If you use a charger universal set voltage about 1.65 volts. Prices for higher voltages cause changes in the comchemische OXID manganese batteries, damage position. If you are using a timer to completee invite you to stop, consult certain producers from your Batteriescations time. Partial loads more take a few hours. Fully discharged batteries need to reload the night.

4

Rechargeable alkaline batteries which deeply discharged to rehabilitate.

Fully discharged batteries bring only charge to full capacity. You must load over several cycles without deep releases fully restore normal batteries passed.